Skip to content
Delta Hidráulica

Servo valve and proportional valve repair

We repair MOOG, STAR, Vickers, Parker and other servo valves and test them on our test bench. Every repair comes with the final test report.

Repair with our own test bench

A servo valve that does not respond properly causes instability, loss of accuracy or machine stoppages. The most common causes are oil contamination, wear of the spool and sleeve, clogged filters or torque motor problems.

Among other signals, our bench measures the pressures in lines A and B, the servo valve flow, the flow to tank and the command signal, to check the valve before and after the repair.

When we finish, we give the customer the final test so they can check it.

Test curves of a servo valve repaired on the Delta Hidráulica test bench: flow, leakage and pressure hysteresis against the command signal
Real curves from the final test of a servo valve repaired on our test bench: flow, internal leakage and hysteresis (A-B pressure), at 70 bar. These are the curves we deliver with the report.

How we repair a servo valve

  1. Receipt and incoming test

    We identify the model and test the valve on the bench to locate the fault.

  2. Disassembly and diagnosis

    Cleaning and inspection of spool, sleeve, filters, nozzles and torque motor.

  3. Repair

    Replacement of filters, seals and damaged or worn components.

  4. Adjustment and final test

    Adjustment and bench test of flow, pressures and leakage.

  5. Report and delivery

    We return the servo valve with the final test report.

Oil analysis

Protect the repaired servo valve: analyse the oil

Most servo valve failures come from the oil: particles smaller than the spool clearance (1 to 3 µm), water or degraded oil. We analyse the oil in your system and give you a technical assessment with the filtration it needs.

  • Sampling and analysis: particles (ISO 4406), water, wear metals and viscosity.
  • Technical assessment focused on your servo valves: risk of silting and wear.
  • 3 µm filtration tailored to your system.

Servo valve brands we repair

Single- and two-stage servo valves and proportional valves from the main manufacturers, such as MOOG D661, D662, D663, D761 or G771.

  • STAR
  • MOOG
  • Vickers
  • Parker Hannifin
  • Hydraustar
  • Zwick Roell
  • Saginomiya
  • and other brands

Need a new servo valve? We are the official STAR servo valve distributor.

Frequently asked questions

How do I send you the servo valve?

Send it by courier to our workshop (Pol. Ind. Ubegun 1-5, pabellón 5, 20810 Orio, Gipuzkoa, Spain), well protected and with the ports plugged. Include a note with your company, contact person, model and the fault you have observed. If you write to us first, we will confirm the shipping details.

What does the repair report include?

It contains the results of the servo valve's final test on the bench, so you can check it works before fitting it.

What if the servo valve cannot be repaired?

We tell you along with the diagnosis and propose an alternative, for example a new STAR servo valve.

Got a faulty servo valve?

Call us or send us a photo of the nameplate on WhatsApp and we'll tell you whether it's better to repair it on our test bench in Orio or replace it with a STAR servo valve.

Nameplate photo / Fault