Skip to content
Delta Hidráulica

On-site hydraulic pump diagnosis

We check pump performance at your plant with portable flowmeters up to 600 l/min, under load and without dismantling the hydraulic power unit.

Has the machine lost speed or force?

As a pump wears, its internal leakage increases and it delivers less flow than it should. The machine slows down, the oil heats up and, if it is not caught in time, the failure ends up stopping production.

Measuring it at the plant, with the machine running, tells you whether the pump is healthy before dismantling anything.

What we check

  • Actual flow under load, with portable flowmeters up to 600 l/min.
  • Volumetric efficiency: actual flow compared with what the pump should deliver.
  • Internal leakage, without dismantling the hydraulic power unit.

Especially useful in

Steel

Large hydraulic power units that cannot be stopped to dismantle a pump "just in case".

Forging

Machines that lose force or cycle speed as the pump wears.

Presses

Checking flow and efficiency before deciding on a repair.

Injection moulding

Slower cycles and hot oil due to internal leakage in the pump.

Frequently asked questions

Does the pump have to be removed to measure it?

No. We insert the flowmeter into the circuit and measure with the machine running, without dismantling the hydraulic power unit.

What flow can you measure?

Our portable flowmeters measure up to 600 l/min, under load.

What if the pump is faulty?

We explain the result and, if it makes sense, repair it in our workshop in Orio.

Suspect a pump has lost performance?

Call us or message us on WhatsApp and we'll arrange the measurement at your plant.

Nameplate photo / Fault